超声波清洗机在各行各业都可用到，并且还有许多新的行业和领域也在不断的加入到这个队伍中来，对于超声波清洗机应用的开发与探索从未停止。   产品喷涂前处置工艺非常重要，一般的保守工艺使用酸液对工件进行处理，对环境污染较重，工作环境较差，同时，大的弊端是结构复杂零件酸洗除锈后的残酸很难冲洗干净。工件喷涂后，时间不长，沿着夹缝呈现锈蚀现象，破坏涂层外表，严重影响产品外观和内在质量。超声波清洗机技术应用到涂装前处理后，不只能使物体外表和缝隙中的污垢迅速剥落，而且涂装件喷涂层牢固不会返锈。   工业领域中超声波测厚是一门成熟的高新技术，最大优点是检测平安、可靠及精度高，而且它可以巡回在运行状态进行检测。超声测厚仪按工作原理分：有共振法、干涉法及脉冲反射法等几种，由于脉冲反射法并不涉及共振机理，与被测物表面的光洁度关系不密切，所以超声波脉冲法测厚仪是受用户欢迎的一种仪表。
Ultrasonic cleaning machine is available in all walks of life, and there are many new industries and fields are also constantly joining the team, for the development and exploration of ultrasonic cleaning machine application has never stopped. The treatment process before spraying is very important. The general conservative process uses acid solution to treat the workpiece, which causes serious environmental pollution and poor working environment. At the same time, the major disadvantage is that the residual acid after pickling and rust removal of parts with complex structure is difficult to clean. After spraying for a short time, the workpiece will rust along the cracks, which will damage the surface of the coating and seriously affect the appearance and internal quality of the product. After the ultrasonic cleaning machine technology is applied to the coating pretreatment, it can not only make the dirt on the surface and crevice of the object quickly peel off, but also the coating layer of the coated parts is firm and will not return to rust. Ultrasonic thickness measurement is a mature high-tech in the industrial field. The greatest advantage of ultrasonic thickness measurement is safe, reliable and high-precision. Moreover, it can be used in the running state for inspection. According to the working principle, ultrasonic thickness gauge can be divided into resonance method, interference method and pulse reflection method. Since pulse reflection method does not involve resonance mechanism and is not closely related to surface finish of the object to be measured, ultrasonic pulse thickness gauge is a kind of instrument welcomed by user